If you have an open trailer, the trimmer rack i recommend is the Pack'Em Trimmer Rack for Open Utility Trailers, part # PK-6. This rack will hold 3 trimmers, so you would need to order 2 of these racks to hold 6 trimmers. This rack attaches to the side rails of an open trailer, and has pre-drilled holes for easy installation. This rack also includes locks to secure the trimmers to the rack.
If you have an enclosed trailer, the rack I recommend is part # PK-6-5. This attaches to the wall... view full answer...
You'd have to install the other PackEm Trimmer Rack - Open Utility Trailers - 1 Trimmer Item # PK-6S on the other side of your trailer but once installed you'd be able to carry two trimmers. view full answer...
Pack 'Em doesn't offer a trimmer rack that would mount directly into a stake pocket. Your best bet would be to use wooden stakes and use those as attachment points for a trimmer rack like # PK-6S2 for one trimmer or # PK-6S-6S2 for two trimmers. I've linked to a product demonstration video for the Pack 'Em trimmer racks. view full answer...
To carry curved trimmers what you'd need to do with one of our trimmer racks like the part # PXSPDDTR3 is have the uprights of the carrier closer together so that the rack grabs the curved trimmers where they are straight.
For carrying blower packs you could then use the part # RA-19 mounted in your trailer. view full answer...
The # PK-6S2 is designed to fit the part # PK-6S and make it a 2 trimmer rack. If you wanted to make it a 3 trimmer rack you could install a second # PK-6S2. view full answer...
There's no reason the Tow-Rax Trimmer Rack # PXSPDDTR3 couldn't physically install in an enclosed trailer. But your trimmers would most likely be held too close to the walls of the trailer. The rack would most likely need to be spaced out away from the walls of the trailer a bit to allow the trimmers to fit and clear. view full answer...
Yes you could hold either of the Redmax trimmers with the Pack'em trimmer rack for utility racks part # PK-6S2 that you referenced. view full answer...
All of our Trimmer Racks are bolt mounted, so you will have to custom mount them on a round top rail. You will either have to run bolts through your tube or run U-Bolts around your top tube.
For a Trimmer Rack, I recommend the Pack'Em Rack # PK-6-OP1. This holds 3 trimmers, 1 blower, 1 line spool, and one cooler. It is a very nice system with a gray powder coat finish. This does not come with mounting hardware, but does come with keyed alike locks.
If you are looking for a more... view full answer...
If all you need is the trimmer rack the best option would be to go with the part # RA-6RL which is two uprights that allow you to carry up to 3 trimmers.
I attached a review video for this rack for you to check out as well. view full answer...
For what you are wanting you would want the following components:
Pack'Em Trimmer Rack for Open Utility Trailers # PK-6
Trim Line Rack for Utility Trailers # RA-2
Lockable Blower Rack for Utility Trailers # RA-19 view full answer...
The only way to get the Pack'Em Single Trimmer Rack for Open Utility Trailers # PK-6S installed on your trailer in the configuration where the two locking ends are on your trailer would be to order a quantity of two of these racks and then only use the locking ends of both units.
If you are using this rack for trimmers one locking end would be sufficient as there would be no way to remove the trimmer if it was locked on the one end. view full answer...
I spoke with my contact at RackEm regarding the ability to upgrade your existing 2 Trimmer System # PK-6S-6S2 to a 3 trimmer setup. He stated that an additional # PK-6S2 will physically bolt to your existing units, but he does not recommend doing this in order to hold 3 trimmers. The reason for this is simply because of the lack of stability the system will provide when adding the additional components.
They do offer a complete 3-trimmer system with part # PK-6-OP1. You can see how, on... view full answer...
Best option we have for that would be the Pack Em Rack part # PK-6-OP1 which will cover the 3 trimmers and one of the blowers and then use the # RA-39-BMH for the other blower and you'd be covered. view full answer...
Yes we do, for a combination trimmer and blower rack that is lockable you would want the part # PK-6-OP1.
This product is designed to be installed on a trailer, but if you wanted to install it in a storage shed you could as well.
I attached an install video for you to check out as well. view full answer...
The only type of shovel rack we offer for open utility trailers is the Pack'Em Rack for Open Utility Trailers part # PK-BM-23-OP1 which allows for up to six straight-handle shovels to be carried. It will be bolted directly to the side rails and is not easily removable. There isn't a version of the Lockable Dual Trimmer Rack for Open Utility Trailers part # 288-01811 for shovels though you could still use this for that with some small modifications if you wanted. view full answer...
The Pack'Em Shovel Rack for Open Utility Trailers # PK-BM-23 will hold up to 6 shovels and would work well for you. I attached an installed picture and review video for you to check out.
Then for a trimmer rack the # PK-6 would work great too. These need to be mounted a minimum of 3 feet apart. Review video and picture attached for this as well. view full answer...
The Pack'Em Rack for Open Utility Trailers, part # PK-6-OP1, is designed to hold 3 trimmers, a blower, a cooler rack and a trimmer spool, saving you a lot of space and helping keep items organized.
For your Stihl 350 blower, you can order part # RA-STIHL. This adapter will allow you to attach your blower to the rack on your trailer. view full answer...
The Pack'em Trimmer Rack for Utility Trailers # PK-6S-6S2 you were looking at is designed to be bolted to flat portions on your trailer, but can be made to work on your trailer with round tubing instead of flat stock.
Using either U-bolts or drilling holes in the round tubes will be required.
I included a video of the # PK-6S-6S2 for you to take a look at. view full answer...